Biomedical Waste: The biomedical waste is a hazardous type waste the incineration must be done at proper way for such waste. We design the Biomedical waste Incinerator with the norms of Emission Standards and that will match the requirement of perfect incineration.
Such Bio Medical Waste may content mixture of the wastes like Body parts, Organs, Human Tissues, Human & Animal cell, Dead Animal, Animal organs, Body parts, Microbiology Waste, Biotechnology waste, Pathological Waste, Anatomical Waste, toxins, Disposable Goods, Hand Gloves, Head Caps, Aprons, Laboratory Generated Waste, Cloths, Tubings, catheters, Vaccine, IV Sets, Intravenous Sets, Urine Bags, Cotton Tapes, Gum Tapes, Dressing Waste, Laboratory Liquids, Blood, Body Fluids, Washing Lab Consumables, House Keeping, Discarded Medicines, Solid Plaster, Animal tissues, Animal carcasses, Bio Chemicals, Drugs, Medicines, Cytotoxic Drugs, Outdated, Expired Medicines, Contaminated, Disinfecting Activities products, Animal House Waste, Hospital Waste, Medical College Waste, Plastics, Disinfected Containers, Papers, Dist Bins Containers, Hazardous Waste, Cytotoxic Hazard Waste, etc.
Some content of such waste can be sterilized but practically, the Segregation of Bio-medical waste is very difficult. As it’s Hazardous waste, it is recommended for Incineration only. Normally Government policies also suggest for the incineration of such waste.
Biomedical Waste Incinerator needs minimum two combustion chambers. First Chamber, where normally the temperature of 850°C to be maintained for complete combustion. Even after burning / incineration of waste at 850°C in the primary Chamber, The smoke after burning, may still have Hazardous contents in it. So the smoke / flue gas (after Primary Chamber) should be taken to Secondary Chamber, where normally the temperature of 1100°C to be maintained. With the higher gas resistance time in such temperature, we can dispose all the hazardous content in the smoke.
After Combustion and post burning, the smoke gases / flue gas may have acidic contents, large Carbon Particles, Sulfur, etc. in it. For Large Carbon Particles, we normally provide Cyclone Dust Collector to collect carbon from the smoke which will collect about 75% carbon particles here. (We don’t recommend to install such equipment for liquid waste because of high moisture content in the smoke.)
For acidic content and other impurities, We provide dual scrubbing system. The First Scrubber is Wet Scrubber which designed with top shower and Vertical Pass for higher efficiency. We suggest some additives like Caustic in the scrubbing media to control acidic impurities in smoke. Secondary Scrubber is normally Ventury type Conical design scrubber with closed bottom tank. It cleans the smoke with normal water. This process also control the temperature of smoke gases to release in the atmosphere.
In addition, as per the need, we provide automatic waste feeding system to feed waste in the Primary Chamber. The options for automatic biomedical waste feeding system are Hydraulic Hopper, Screw Feeder, Belt Conveyor, etc. If required, we also provide droplet Separator, Bag Filter, etc.
The Chimney should be 30 meters (100 Feet) which we can provide with Sampling Platform, Ladder, Guard and with / without Rubber Lining or coating.
HEAVY CONSTRUCTION &
CARE FOR LOWER
Complete System with Dual Chambers, Dual Scrubbers & Chimney.
A Type Biomedical Waste Incinerator is the Incineration System which can incinerate Biomedical Waste, The System fully follow the Guidelines for Incineration process with Dual Combustion Chambers (850°C + 1100°C), Dual Scrubbing System & 100 Feet Chimney.
A Type Biomedical Waste Incinerators are Available in the range of 5Kg/Hr, 10Kg/Hr, 25Kg/Hr, 50Kg/Hr, 100Kg/Hr, 250Kg/Hr, 500Kg/Hr, 1000Kg/Hr, 1500Kg/Hr, 2500Kg/Hr & As per required Specific Quantity.
Incinerator System with Dual Chambers, Single Scrubber & Small Chimney.
B Type Biomedical Waste Incinerator is the Incineration System which Partially follow the Guidelines for Incineration process with Dual Combustion Chambers (850°C + 1100°C), Single Scrubbing System & Small Chimney.
B Type Biomedical Waste Incinerators are Available in the range of 5Kg/Hr, 10Kg/Hr, 25Kg/Hr, 50Kg/Hr, 100Kg/Hr, 250Kg/Hr, 500Kg/Hr & As per required Specific Quantity.
Incinerator System with Dual Chambers, Dry Filter & Small Chimney.
C Type Biomedical Waste Incinerator is the Incineration System which incinerate mainly the solid waste at high temperature (850°C + 1100°C), Dry Filter & About 10 Feet Chimney.
C Type Biomedical Waste Incinerators are Available in the range of 5Kg/Hr, 10Kg/Hr, 25Kg/Hr, 50Kg/Hr, 100Kg/Hr & As per required Specific Quantity.
Small Incinerator with Single Chamber, Dry Filter & Small Chimney.
D Type Biomedical Waste Incinerator is the Incinerator which incinerate mainly the solid Biomedical waste is a close Chamber, Dry Filter & 10 Feet Chimney.
D Type Biomedical Waste Incinerators are Available in the range of 2Kg/Hr, 5Kg/Hr, 10Kg/Hr, 25Kg/Hr, 50Kg/Hr & As per required Specific Quantity.